Installing a mod chip into your play station 2 video game can be an intimidating task. Unless you have had prior experience using a soldering iron and have the confidence in your soldering abilities, you might be wondering if you would be able to do it.

The good news is that almost all Playstation 2 video Game Mod chip manufacturer have come to the realization that not only do the need to ensure that their Playstation 2 video game have many features, but that they also should be relatively easy to install.

The fact is that not everyone who owns a play station 2 video game has worked with electronics and soldering irons. The truth is that many individuals have probably never touched a soldering iron. Any how it is certainly not that difficult to install a mod chip into your play station 2 video game console, but of course this in not for everyone.

It is advisable though, to purchase your play station 2 video game console with a mod chip preinstalled than to purchase a new system with the intention of purchasing a mod chip and doing the installation yourself. Doing this will eliminate the need to install a mod chip and almost all of these systems will come with a lifetime warranty with the installation.

Any way to install a mod chip, you will need the right soldering iron that is not very big or one that carries a lot of heat that might cause the main board of you play station 2 video game console to melt. You will need a soldering iron that has a small, fine tip which will make it easy to install the play station 2 video game mod chip when you have to solder the smaller sections of the motherboard. A soldering iron rated at 15watts will provide enough heat for the soldering job, without actually damaging your console.

Use thin, 15AWG wrapping wire: far too often, a ps2 video game mod chip installation is botched because of the wiring that is used. If the wire is too thick, you will have a hard time attaching it to the right places, without the wire touching another part of the main board. The wrapping wire you use should also be insulated, because this ensures you would not short out your main board.

Use Solder with Flux in it: For those of you that don’t know, flux helps solder melt and attach itself to both the wires you’re using as well as the solder points. Far too often people are using solder without flux, and buying flux separately. Don’t! Doing it that way will mean that you could potentially use too much flux, and corrode or eat away at the solder point as time goes on, forcing you to re-solder at a later date.

Keep your wires as short as possible: Because you’re actually sending data / information FROM the mod chip, to your Playstation 2 video game motherboard, the less of a distance that the data / information has to travel, the better. Many customers that initially thought they had done an incorrect ps2 video game mod chip installation were simply wiring up their mod chips with wires that were far too long. The Playstation 2 is a bit picky, make sure to keep your power and ground wires as short as possible.

The most important tip is simply to take your time. Installing that ps2 video game mod chip in the mail means sitting down and not wanting to install it right away, as fast as you can. Some of the solder points are small, requiring precision. While you don’t have to be an expert a soldering, you DO have to take your time, making sure and double checking every single connection. Make sure that the wires ARE actually attached, and more importantly, that they’re attached to ONLY the soldering points they should be, without touching any other wires.

Make sure you get the RIGHT chip for your Playstation 2 video game console model number. There are 16 different versions of the Playstation 2 Main Board, and you have one of them. The question is which one do YOU have. Before you buy your ps2 mod chip, make sure to check which version you have.

You can of course opt for a Universal PS2 Mod chip, this will do away with having to find out your model number in advance, because the universal ps2 mod chips like the Modbo 4.0, will work in every single Playstation 2 video game console on the market today.

There is absolutely no need to be intimidated by a ps2 video game mod chip installation. Just make sure you have the right equipment and your hands are steady. If you think you can not do the necessary soldering then opt to go for the pre modded ps2 video game systems.

They’re not expensive, and they are truly a plug and play solution. But be careful that the store you’re buying from is selling you a BRAND NEW Playstation 2 video game and that they will actually replace the original Sony Warranty, as you don’t want to be in a position where you end up with a brand new PS2 video game, without a warranty in place.